Cisco TelePresence SX10 - Xcommand Audio Vumeter Stop; Xcommand Audio Vumeter Stopall; Bookings Commands; Xcommand Bookings Clear

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 90
Cisco TelePresence SX10
API Reference Guide
xCommand Audio VuMeter Stop
Stop the VU meter on the specified connector. You have to specify both the connector's type
and number (ConnectorType, ConnectorId) to uniquely identify the connector.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Stop ConnectorID: ConnectorID ConnectorType:
ConnectorType
where
ConnectorID : Integer (1..2) for Microphone; Integer (1..1) for HDMI
Select a connector number. Together with the ConnectorType it uniquely identifies the
connector. Microphone [1] is the built-in microphone, and Microphone [2] is a micro-
phone connected to the mini-jack input connector.
ConnectorType : HDMI/Microphone
Select the connector type.
xCommand Audio VuMeter StopAll
Stop all VU meters.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter StopAll
Bookings commands
xCommand Bookings Clear
Clear the current stored list of bookings.
Requires user role: ADMIN, USER
USAGE:
xCommand Bookings Clear
xCommand Bookings Get
Get the booking information for a specific ID.
Requires user role: ADMIN, USER
USAGE:
xCommand Bookings Get Id: "Id"
where
Id : String (0, 128)
The booking ID of a call or conference.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand