Cisco TelePresence SX10 - Video Commands; Xcommand Video Activespeakerpip Set; Xcommand Video Input Source Setactiveconnector; Xcommand Video Layout Layoutfamily Set

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 125
Cisco TelePresence SX10
API Reference Guide
Video commands
xCommand Video ActiveSpeakerPIP Set
Sets position for the active speakers PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video ActiveSpeakerPIP Set Position: Position
where
Position : CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
UpperRight
Select one of the predefined positions.
xCommand Video Input Source SetActiveConnector
Select which connector is active.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Input Source SetActiveConnector [ConnectorId: ConnectorId]
where
ConnectorId : Integer (2..3)
The identifier (ID) of the connector. Connector [n] has ID n. Check the Video Input
Connector status to find the connector IDs.
xCommand Video Layout LayoutFamily Set
Select the screen layout mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Layout LayoutFamily Set [Target: Target] [CallId: CallId]
LayoutFamily: LayoutFamily [CustomLayoutName: "CustomLayoutName"]
where
Target : local/remote
Select if the target is the local layout or the remote layout.
CallId : Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During the call you
can run the xStatus Call command to see the CallId.
LayoutFamily : auto/custom/equal/overlay/prominent/single
Select a layout family.
CustomLayoutName : String (1, 128)
Enter a name for the layout.
xCommand Video PresentationPIP Set
Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position: Position
where
Position : CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
UpperRight
Select one of the predefined positions.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand