Cisco TelePresence SX10 - Video Configuration; Xconfiguration Video Defaultmainsource; Xconfiguration Video Input Connector [1

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 77
Cisco TelePresence SX10
API Reference Guide
Video configuration
xConfiguration Video DefaultMainSource
Define which video input source shall be used as the main video source.
Requires user role: ADMIN, USER
Default value: 1
USAGE:
xConfiguration Video DefaultMainSource: DefaultMainSource
where
D efaultMainSource : 1
Set the source to be used as the main video source.
xConfiguration Video Input Connector [1..3] CameraControl Mode
Define whether the camera that is connected to this video input connector can be controlled or
not.
Note that camera control is not available for Connector 2 (HDMI) and Connector 3 (VGA).
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1: On Connector 2,3: Off
USAGE:
xConfiguration Video Input Connector n CameraControl Mode: Mod e
where
n : Unique ID that identifies the video input connector. Range: 1..3
Mode : Connector 1: Off/On Connector 2,3: Off
Off: Disable camera control.
On: Enable camera control.
xConfiguration Video Input Connector [1..3] CameraControl CameraId
The camera ID is a unique identifier of the cameras that are connected to the video input.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Video Input Connector n CameraControl CameraId: CameraId
where
n : Unique ID that identifies the video input connector. Range: 1..3
CameraId : 1
The camera ID is fixed and cannot be changed.
xConfiguration Video Input Connector [1..3] InputSourceType
Select which type of input source is connected to the video input.
Note that Connector 1 is the system's integrated camera.
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1: camera Other connectors: PC
USAGE:
xConfiguration Video Input Connector n InputSourceType: InputSourceType
where
n : Unique ID that identifies the video input connector. Range: 1..3
InputSourceType : Connector 1: camera Other connectors: PC/camera/document_camera/
mediaplayer/whiteboard/other
Camera: Use this when a camera is connected to the video input.
Document_camera: Use this when a document camera is connected to the video input.
Mediaplayer: Use this when a media player is connected to the video input.
PC: Use this when a computer is connected to the video input.
Whiteboard: Use this when a whiteboard camera is connected to the video input.
Other: Use this when the other options do not match.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xConfiguration