Cisco TelePresence SX10 - Xstatus Network 1 VLAN Voice Vlanid; Networkservices Status; Xstatus Networkservices NTP Currentaddress; Xstatus Networkservices NTP Server [N] Address

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 158
Cisco TelePresence SX10
API Reference Guide
xStatus Network 1 VLAN Voice VlanId
The feedback shows the VLAN Voice ID; or Off if the VLAN Voice Mode is not enabled.
Requires user role: ADMIN, USER
Value space of the result returned:
Off/1..4094
Example:
xStatus Network 1 VLAN Voice VlanId
*s Network 1 VLAN Voice VlanId: "Off"
** end
NetworkServices status
xStatus NetworkServices NTP CurrentAddress
Returns the address of the NTP server that is currently in use.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus NetworkServices NTP CurrentAddress
*s NetworkServices NTP CurrentAddress: "123.254.15.121"
** end
xStatus NetworkServices NTP Server [n] Address
Returns the address of the NTP server(s) the codec is using.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus NetworkServices NTP Address
*s NetworkSer vices NTP Address: "12.104.193.12 64.104.222.16 144.254.15.121"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus