Cisco TelePresence SX10 - Xcommand Call Reject; Xcommand Call Resume; Xcommand Call Unattendedtransfer; Callhistory Commands

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 94
Cisco TelePresence SX10
API Reference Guide
xCommand Call Reject
Reject incoming call. If no call id is specified, all incoming calls are rejected.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Reject [CallId: CallId]
where
CallId : Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
xCommand Call Resume
Resume a call that have been put on hold.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Resume [CallId: CallId]
where
CallId : Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
xCommand Call UnattendedTransfer
Transfers an ongoing call to another participant. Fully supported for SIP calls only.
Requires user role: ADMIN, USER
USAGE:
xCommand Call UnattendedTransfer CallId: CallId Number: "Number"
where
CallId : Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
Number : String (0, 255)
The number the call is transfered to.
CallHistory commands
xCommand CallHistory AcknowledgeAllMissedCalls
Turns off the missed calls indicator on the touch controller for all missed calls.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory AcknowledgeAllMissedCalls
xCommand CallHistory AcknowledgeMissedCall
Turns off the missed calls indicator on the touch controller for the specified call.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory AcknowledgeMissedCall CallHistoryId: CallHistoryId
[AcknowledgeConsecutiveDuplicates: AcknowledgeConsecutiveDuplicates]
where
CallHistoryId : Integer (1..2147483647)
CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id
number.
AcknowledgeConsecutiveDuplicates : False/True
You can include or exclude all surrounding calls with duplicate information.
xCommand CallHistory DeleteAll
Deletes all information on previous calls.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory DeleteAll [Filter: Filter ]
where
Filter : All/Missed/Placed/Received
You can filter which calls to delete.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand