Cisco TelePresence SX10 - Proximity Status; Xstatus Proximity Services Availability; Roomanalytics Status

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 164
Cisco TelePresence SX10
API Reference Guide
Proximity status
xStatus Proximity Services Availability
Shows whether proximity services are available on the endpoint.
Available: Proximity mode has been enabled with the command xConfiguration Proximity Mode
and one or more of the proximity services have been enabled with xConfiguration Proximity
Services commands.
Disabled: Proximity mode has been disabled with xConfiguration Proximity Mode, or none of the
services have been enabled with the xConfiguration Proximity Services commands.
Deactivated: Proximity services have been deactivated with the command xCommand Proximity
Services Deactivate.
Requires user role: ADMIN, USER
Example:
xStatus Proximity Services Availability
*s Proximity Services Availability: Disabled
** end
RoomAnalytics status
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus