Cisco TelePresence SX10 - Xstatus Networkservices NTP Status; Peripherals Status; Xstatus Peripherals Connecteddevice [N] Hardwareinfo; Xstatus Peripherals Connecteddevice [N] ID

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 159
Cisco TelePresence SX10
API Reference Guide
xStatus NetworkServices NTP Status
Returns the status of the endpoints synchronizing with the NTP server.
Discarded: The NTP result has been discarded.
Synced: The system is in sync with the NTP server.
NotSynced: The system is not in sync with the NTP server.
Unknown: The state of the synchronization is unknown.
Off: No synchronization with the NTP server.
Requires user role: ADMIN, USER
Value space of the result returned:
Discarded/Synced/NotSynced/Unknown/Off
Example:
xStatus NetworkServices NTP Status
*s NetworkServices NTP Status: Synced
** end
Peripherals status
xStatus Peripherals ConnectedDevice [n] HardwareInfo
Shows hardware information about connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 HardwareInfo
*s Peripherals ConnectedDevice 1007 HardwareInfo: "1122330-0"
** end
xStatus Peripherals ConnectedDevice [n] ID
Shows the MAC-address of the connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 ID
*s Peripherals ConnectedDevice 1007 ID: "00:10:20:20:be:21"
** end
xStatus Peripherals ConnectedDevice [n] Name
Shows the product name of connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 Name
*s Peripherals ConnectedDevice 1007 Name: "Cisco TelePresence Touch"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus