Cisco TelePresence SX10 - Xstatus Call [N] Remotenumber; Xstatus Call [N] Status; Xstatus Call [N] Transmitcallrate; Cameras Status

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 138
Cisco TelePresence SX10
API Reference Guide
xStatus Call [n] RemoteNumber
Shows the remote (far end) number or URI of an incoming or outgoing call. You can run the
command xStatus Call to find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Call 27 RemoteNumber
*s Call 27 RemoteNumber: "5585232"
** end
xStatus Call [n] Status
Shows the status of a call. You can run the command xStatus Call to find the call identity.
Requires user role: ADMIN, USER
Value space of the result returned:
Idle/Dialling/Ringing/Connecting/Connected/Disconnecting/OnHold/EarlyMedia/Preserved/
RemotePreserved
Example:
xStatus Call 27 Status
*s Call 27 Status: Connected
** end
xStatus Call [n] TransmitCallRate
Shows the transmit bandwidth in the call in kilobits per second (kbps). You can run the
command xStatus Call to find the call identity.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer
Example:
xStatus Call 27 TransmitCallRate
*s Call 27 TransmitCallRate: 768
** end
Cameras status
xStatus Cameras Camera [n] Capabilities Options
Shows the camera capabilities (ptzf = pan, tilt, zoom, focus).
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 Capabilities Options
*s Camera 1 Capabilities Options: "ptzf"
** end
xStatus Cameras Camera [n] Connected
Shows if the camera is connected or not.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
True/False
Example:
xStatus Cameras Camera 1 Connected
*s Camera 1 Connected: True
** end
xStatus Cameras Camera [n] Flip
In Flip mode (vertical flip) the image can be flipped upside down.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
Auto/On/Off
Example:
xStatus Cameras Camera 1 Flip
*s Camera 1 Flip: "Off"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus