D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 89
Cisco TelePresence SX10
API Reference Guide
xCommand Audio Volume Mute
Mute the volume on the endpoint.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Mute
xCommand Audio Volume Set
Set the volume on the endpoint to a specified level.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Set Level: Level
where
Level
: Integer (0..100)
Select the gain level. 70 equals 0 dB gain, and 100 equals 15 dB gain.
xCommand Audio Volume SetToDefault
Set the volume to the default level that is defined in the xConfiguration Audio DefaultVolume
setting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume SetToDefault
xCommand Audio Volume ToggleMute
Toggle the loudspeaker between muted and unmuted.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume ToggleMute
xCommand Audio Volume Unmute
Set the volume on the endpoint back on after muting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Unmute
xCommand Audio VuMeter Start
Start a VU meter to show the audio signal level on the specified connector. You have to specify
both the connector's type and number (ConnectorType, ConnectorId) to uniquely identify the
connector. The VU meter measures the input level for frequencies below 20 kHz.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Start ConnectorID: Con nectorID ConnectorType:
ConnectorType
where
ConnectorID
: Integer (1..2) for Microphone; Integer (1..1) for HDMI
Select a connector number. Together with the ConnectorType it uniquely identifies the
connector. Microphone [1] is the built-in microphone, and Microphone [2] is a micro-
phone connected to the mini-jack input connector.
ConnectorType
: HDMI/Microphone
Select the connector type.
To Next Page
Loading...
