Cisco TelePresence SX10 - Xstatus Mediachannels Call [N] Channel [N] Direction; Xstatus Mediachannels Call [N] Channel [N] Encryption; Xstatus Mediachannels Call [N] Channel [N] Netstat Bytes; Xstatus Mediachannels Call [N] Channel [N] Netstat Channelrate

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 151
Cisco TelePresence SX10
API Reference Guide
xStatus MediaChannels Call [n] Channel [n] Direction
Shows the direction of the call.
Incoming: The call is an incoming call.
Outgoing: The call is an outgoing call.
Requires user role: ADMIN, USER
Value space of the result returned:
Incoming/Outgoing
Example:
xStatus MediaChannels Call 27 Channel 327 Direction
*s MediaChannels Call 27 Channel 327 Direction: Incoming
** end
xStatus MediaChannels Call [n] Channel [n] Encryption
Shows the encryption status for audio or video on the incoming or outgoing call.
Requires user role: ADMIN, USER
Value space of the result returned:
On/Off
Example:
xStatus MediaChannels Call 27 Channel 327 Encryption
*s MediaChannels Call 27 Channel 327 Encryption: On
** end
xStatus MediaChannels Call [n] Channel [n] NetStat Bytes
Shows the number of bytes for audio, video or data on the incoming or outgoing channel.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Bytes
*s MediaChannels Call 27 Channel 327 NetStat Bytes: 496640
** end
xStatus MediaChannels Call [n] Channel [n] NetStat ChannelRate
Shows the bandwidth for audio, video or data on the incoming or outgoing channel.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat ChannelRate
*s MediaChannels Call 27 Channel 327 NetStat ChannelRate: 128000
** end
xStatus MediaChannels Call [n] Channel [n] NetStat Jitter
Shows the jitter for audio, video or data at the present moment on the incoming or outgoing
channel, as specified by RFC 3550.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Jitter
*s MediaChannels Call 27 Channel 327 NetStat Jitter: 2
** end
xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalLost
Shows the number of packets lost for audio, video or data during the last interval on the incom-
ing or outgoing channels.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat LastIntervalLost
*s MediaChannels Call 27 Channel 327 NetStat LastIntervalLost: 0
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus