Cisco TelePresence SX10 - Audio Status; Xstatus Audio Input Connectors HDMI [N] Ecreferencedelay; Xstatus Audio Input Connectors Microphone [N] Connectionstatus; Xstatus Audio Input Connectors Microphone [N] Ecreferencedelay

D15333.07 Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017. Copyright © 2017 Cisco Systems, Inc. All rights reserved. 133
Cisco TelePresence SX10
API Reference Guide
Audio status
xStatus Audio Input Connectors HDMI [n] EcReferenceDelay
Returns the detected latency for each loudspeaker to microphone path for systems supporting
HDMI input used as microphone input. The result is in milliseconds.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Audio Input Connectors HDMI 1 EcReferenceDelay
*s Audio Connectors HDMI 1 EcReferenceDelay: 0
** end
xStatus Audio Input Connectors Microphone [n] ConnectionStatus
Indicates whether a microphone is detected on the microphone input connector.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Connected/NotConnected/Unknown
Example:
xStatus Audio Input Connectors Microphone ConnectionStatus
*s Audio Input Connectors Microphone 1 ConnectionStatus: NotConnected
*s Audio Input Connectors Microphone 2 ConnectionStatus: Connected
** end
xStatus Audio Input Connectors Microphone [n] EcReferenceDelay
Returns the detected latency for each loudspeaker to microphone path. The result is in
milliseconds.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Audio Input Connectors Microphone 1 EcReferenceDelay
*s Audio Connectors Microphone 1 EcReferenceDelay: 120
** end
xStatus Audio Input RemoteInput [n] CallId
Shows the CallId for the remote audio input.
You can run the command xStatus Audio Input RemoteInput to find the identity [n] of the input.
Requires user role: ADMIN, USER
Value space of the result returned:
0..65534
Example:
xStatus Audio Input RemoteInput 8 CallId
*s Audio Input RemoteInput 8 CallId: 28
** end
xStatus Audio Microphones Mute
Shows whether the microphones are muted.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
On/Off
Example:
xStatus Audio Microphones Mute
*s Audio Microphones Mute: Off
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus