Cisco UCS C885A M8 - Page 90

DescriptionLED Code
ABL Error Nvdimm Arm Mismatch Power Policy
Error
0xE2FE
ABL Error Nvdimm Arm Mismatch Power Source
Error
0xE2FF
ABL Error ABL 1 Mem Init Error0xE300
ABL Error ABL 2 Mem Init Error0xE301
ABL Error ABL 4 Mem Init Error0xE302
ABL Error ABL 6 Mem Init Error0xE303
ABL Error ABL 1 error repor Error0xE304
ABL Error ABL 2 error repor Error0xE305
ABL Error ABL 3 error repor Error0xE306
ABL Error ABL 4 error repor Error0xE307
ABL Error ABL 6 error repor Error0xE308
ABL Error message slave sync function execution
Error
0xE30A
ABL Error slave offline Error0xE30B
ABL Error Sync Master Error0xE30C
ABL Error Slave Informs Master Info Message Error0xE30D
ABL Error Mix Hynix LRDIMM with other vendor
LRDIMM in a channel
0xE30E
ABL Error General Assert Error0xE30F
ABL ErrorNo Dimms On Any Channel in system0xE310
ABL Error for Shared Heap Aloc error0xE311
ABL Error for Main Heap Aloc error0xE312
ABL Error for Shared Heap loc error0xE313
ABL Error for Main Heap loc error0xE314
ABL Error No memory available in system0xE316
ABL Error Mixed Ecc and Non-Ecc DIMM in a
channel
0xE320
Cisco UCS C885A M8 Server Installation and Service Guide
80
POST Error Codes
POST Error Codes