Cisco UCS C885A M8 - Page 91

DescriptionLED Code
ABL Error Mixed 3DS and Non-3DS DIMM in a
channel
0xE321
ABL Error Mixed x4 and x8 DIMM in a channel0xE322
ABL Memory MBIST Rrw default test0xE323
ABL Memory MBIST Interface test0xE324
ABL Memory MBIST DataEye0xE325
ABL Memory Post Package Repair0xE326
ABL Error S0i3 DF restore buffer Error0xE327
ABL Error CPU OPN Mismatch in case of Multi
Socket population
0xE328
Recoverable APCB Checksum Error0xE329
Fatal APCB Checksum Error0xE32A
ABL Error BIST Failure0xE32B
ABL Error DDR Type Mismatch DDR5 Error0xE32C
ABL Error Mix DIMM with different ECC bit size
in a channel
0xE32D
ABL Error No ability to recover I2C bus without
power cycling the platform
0xE32E
ABL Error I2C reset failure0xE32F
ABL Error DDR Module Type Mismatch0xE330
ABL Error PMIC Error0xE331
ABL Error Incompatible OPN0xE332
ABL Error No ability to recover I3C bus without
power cycling the platform
0xE333
ABL Error I3C reset failure0xE334
ABL Error Absence of either or both AC-Power GPIO
or WLAN GPIO Apcb Data
0xE335
ABL Memory Heal BIST Start0xE336
ABL Memory Heal BIST End0xE337
ABL Memory Heal BIST Write0xE338
Cisco UCS C885A M8 Server Installation and Service Guide
81
POST Error Codes
POST Error Codes