9
SECTION 2
COMPUTER SETUP
2.0 Treadmill Software Installation
You must have administrator rights/privledges on the host computer for the software to install successfuly.
The software is expected to be installed and run locally on the host computer’s hard drive and not from a
remote mapped network resource.
Follow these steps to install the Treadmill software:
Insert the Treadmill Software CD-ROM into the host computer. If the “Treadmill Software Setup”
application does not automatically launch, then you must manually launch the installation program.
Select “Start >> Run...” from the desktop taskbar. A “Run” window will open.
Click the Browse button. A “Browse” window will open.
Select the CD-ROM drive from the “Look in:” combo box.
Click once to highlight “Setup.exe” from the list of files on the CD-ROM.
Click the Open button. The “Browse” window will close and return focus back to the “Run” window.
Click the OK button to begin the installation program.
Windows may pause to ask to allow an unknown program to make changes to the computer. Click the
Yes button to continue.
Upon initialization, some install files will be processed and copied to the host computer. These files will be
removed if setup is cancelled. Then, a blue “Treadmill Software Setup” backdrop and installation window
are displayed.
To Next Page
Loading...
Need help?
General
