3.0 Metabolic Mouse/Rat
Additional hardware for a Metabolic Mouse or Rat system will contain the following items:
Two-Lane Modular Mouse shown, all others similar.
1 - Left-Support with hardware:
o 2 - 1/4"-20 socket-cap screws, 1/2" long.
1 - Right-Support.
1 - Top-Brace with hardware:
o 2 - 1/4"-20 socket-cap screws, 1-1/4” long.
o 4 - 1/4" flat washers.
o 2 - 1/4"-20 acorn nuts.
1 - Actuator-Brace with hardware:
o 2 - #10-24 socket-shoulder screws, 2-1/2” long.
o 2 - 1/4"ID, 1/2"OD x 1” long bronze bushings.
o 2 - 1/4"ID, 1/2"OD x 1/4" long spacers.
1 - 7/16” open-ended wrench.
You will also need:
3/16” Hex Key (comes with metabolic treadmill).
1/8” Hex Key (comes with metabolic treadmill).
To Next Page
Loading...
