55
6.5 Baud Rate
This is used to set the CI-Bus communication speed which is set upon power-up. The baud rate can be
changed through the course of an experiment via computer control. If the unit fails to respond to computer
queries, this option can be used to view and change the communication baud rate as necessary. The
baud rate range includes: 19200, 38400, 57600, 115200, 128000, 230400, 1M and 2M (19200 typical).
Press the “ODOMETER RESET” button to select the option. The baud rate is now editable.
Use the “SPEED” knob to select the new communication speed.
Then press-and-hold the “ODOMETER RESET” button to save the new setting. Else, press-and-
release to cancel.
To Next Page
Loading...
Need help?
General
