13
SECTION 3
HARDWARE SETUP
3.0 Typical Item Inventory
A typical Treadmill system may contain the following items:
• 1 x CI-Bus Hub Interface, 4-ports with CI-Bus terminators (orange/blue plugs).
• 1 x USB cable, 1.8m (6 foot), A-B.
• 1 x CAT5 network cable, 1.8m (6-foot), 8p8c (RJ-45).
• The Treadmill Controller with AC power cord.
• 1 x Amphenol motor cable 1.8m (6-foot), 6-pin 6-conductor circular plug-plug.
• 1 x D-Sub shock cable, 1.8m (6-foot), 15-pin 15-conductor male-male.
• 1 x Calibration Wheel.
• 1 x Instruction Manual.
• 1 x Treadmill Software CD-ROM.
To Next Page
Loading...
