52
5.5.2 Start Profile Mode Experiment (continued)
The program will initialize all of the controllers of the system with the settings from the first period: Step 1.
In any period, when the “Shock” is set to “True”, the shock stimulus will be presented to the grids (as long
as a specified limit has not been reached) and data will be accumulated for that period. If the “Shock” is set
to “False”, then the shock is removed from the grids and no data will accumulate for the period.
The “Profile Mode” tab provides additional details about the experiment session:
• “-->”: An arrow within the “Step” column of the profile grid indicates which step (period) is currently
in use.
• Step Time: reports the time remaining within the current step.
• Vertical Red Bar: indicates the current position within the profile.
• Stop : used to manually terminate an experiment. Necessary when the “Loop Profile” option has
been checked.
To Next Page
Loading...
Need help?
General
