EasyManua.ls Logo

Compaq Deskpro 2000 - Chapter 1 Product Description (cont. 2)

Compaq Deskpro 2000
269 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-8 Product Description
1.3.8 System I/O
The onboard I/O controller integrates the functions for the serial and parallel ports, diskette drives,
the keyboard and mouse. This component provides support for the following:
Multimode bidirectional parallel port
Standard mode: Centronics-compatible operation
High-speed mode with support for an enhanced capabilities port (ECP) and enhanced parallel
port (EPP)
One RS-232C compatible 9-pin serial port
Integrated real-time clock
242-byte, battery-backed CMOS RAM
Integrated 8042-compatible keyboard controller
Industry-standard diskette drive controller that supports 360-kilobyte and 1.2-megabyte
5.25-inch drives
1.3.9 System BIOS
The system BIOS provides ISA and PCI compatibility. Contained in a flash memory device on the
system board, the BIOS provides both the Power-On Self-Test (POST) and PCI and EIDE auto-
configuration utilities.
The system BIOS is always “shadowed.” Shadowing allows any BIOS routines to be executed from
fast 64-bit onboard DRAM instead of from the slower 8-bit flash device.
PCI Auto-Configuration
The PCI auto-configuration utility works in conjunction with the Setup program to support using PCI
expansion boards in the system. When you turn on the computer power after installing a PCI board,
the BIOS automatically configures interrupts, I/O space, and PCI devices. If problems arise or you
wish to reconfigure the device, refer to Chapter 2, “Compaq Utilities,” which explains how to use the
Setup program. The PCI auto-configuration program complies with version 2.1 of the PCI BIOS
specification.
IDE/EIDE Auto-Configuration
If you install an IDE/EIDE drive into the computer, the IDE/EIDE auto-configuration utility
automatically detects and configures the drive for operation in the computer. This utility eliminates
the need to run the Setup program after you install an IDE/EIDE drive.
ISA Plug and Play Capability
ISA Plug and Play capability provides auto-configuration of Plug and Play ISA boards and resource
management for legacy (non–Plug and Play) ISA boards when used with Computer Setup or a Plug
and Play–compatible operating system like Microsoft’s Windows 95.

Table of Contents

Other manuals for Compaq Deskpro 2000

Related product manuals