Compaq Deskpro 2000 User Manual

Compaq Deskpro 2000 Series of Personal Computers 2-1
chapter
2
C
OMPAQ
U
TILITIES
This chapter contains descriptions of Compaq utilities that can be helpful when servicing the Compaq
Deskpro 2000 Series of Personal Computer. These utilities include:
■
Configuration and Diagnostics
■
ROMPaq
■
Compaq Intelligent Manageability
■
Compaq Insight Manager
■
Prefailure Warranty
See Appendices E, F, and G for error codes, error messages, and other troubleshooting techniques.
The Configuration and Diagnostics utilities are located on a hard disk partition on the computer.
These utilities include Create a Diagnostics Diskette, Setup, TEST, and INSPECT.
You can run Configuration and Diagnostics from diskette, or use the
Support Software CD
to install a
system partition containing Configuration and Diagnostics utilities.
Use the Compaq Configuration and Diagnostics utilities in the following instances:
■
When a system configuration error is detected during the Power-On Self-Test (POST).
■
To change factory default settings for some of the computer features.
■
To change the system configuration, which is sometimes necessary when you add or remove
optional hardware.
■
To set system configuration features.
2.1 Getting Ready
2.1.1 Preparing the Computer
If you encounter an error condition, complete the following steps before starting problem isolation
procedures:
1. Ensure proper ventilation. The computer should have a 3-inch (7.6-cm) clearance at the front and
back of the system unit.
2. Turn off the computer and peripheral devices.

Compaq Deskpro 2000 Specifications

General

Brand	Compaq
Model	Deskpro 2000
Category	Desktop
Language	English