Compaq Deskpro 2000

I-8 Index
replicated setup, 2-22
restoring your hard drive,
2-27
riser board
removal and replacement,
5-18, 6-11
riser brace
illustrated, desktop, 3-22
illustrated, minitower, 3-4
removal and replacement,
5-19, 6-7
spare part number, desktop,
3-22
spare part number, minitower,
3-5
ROM, 2-14, 2-18
ROM upgrade, 2-19
recovery from upgrade failure,
2-20
remote, 2-19
ROMPaq
using, 2-14
ROMPaq diskette, 2-18
routine care, 4-4
computer case, 4-4
general precautions, 4-4
keyboard, 4-5
monitor, 4-5
mouse, 4-5
S
S3 Trio64V2/GX
drivers, 3-27
graphics resolutions, 8-15
screws, 4-6
Scroll Lock key, 1-23
SCSI
cable, spare part number,
3-9
connector pin assignments,
A-4
controller, spare part number,
3-11
device daisy-chain, D-1
device ID number, D-1
devices, spare part number,
3-7
external devices, D-1
hard drives, 1-24
installation guidelines, D-1
startup sequence, D-1
termination, D-1, D-2
test error codes, E-9, E-10
troubleshooting without
diagnostics, G-9
SDRAM data width, H-1
Seagate
2.1-GB EIDE hard drive
jumper settings, 7-10
3.2-GB EIDE hard drive
jumper settings, 7-12
security
management, 1-13
system, 1-10
security management, 1-13,
2-17
remote, 2-22
serial connector, 1-16
serial connector location,
1-21
serial interface
connector, A-2
serial number, 1-11
location, desktop, 5-1
location, minitower, 6-1
serial port, 1-4, 1-9
test error code, E-4
serial/parallel interface
option, 1-25
serial/parallel interface board
spare part number, 3-13
service
software, 4-6
tools, 4-6
service considerations, 4-6
Setup utility
power-on password, 2-6
shipping boxes
spare part number, 3-24
SMART. See SMART II
SMART II
compatibility, 1-3, 1-4,
2-16
hard drive, C-2
soft-drive type assignments,
C-2
software
preloaded, 1-10
service, 4-6
spare part number, 3-26
support, 2-23
spare part number
cables, 3-9
chassis, 3-3, 3-5
documentation, 3-25, 3-26
feet, 3-3, 3-5
front bezel, 3-3, 3-5
keyboard, 3-14
LED cable, 3-9
logo kit, 3-3, 3-5
mass storage, 3-7
miscellaneous hardware,
3-19
miscellaneous metals, 3-22
miscellaneous parts, 3-23
miscellaneous plastics,
3-20, 3-21
monitor, 3-17
power supply, 3-3, 3-5
power switchkit, 3-24
shipping boxes, 3-24
system unit, 3-3, 3-5
system unit cover, 3-3
unit cover, 3-5
speaker, 1-5, 1-10
removal and replacement, 5-7,
6-12
specifications
audio, 8-14
CD-ROM drive, 8-10
desktop, 8-1
diskette drive, 8-7
hard drive, 8-8, 8-9
keyboard, 8-14
LS-120 drive, 8-13
minitower, 8-2
mouse
2-button, 8-15
PD-CD drive, 8-11
standard and optional boards
illustrated, 3-10, 3-12
spare part number, 3-11,
3-13
standard boards
illustrated, 3-12
spare part number, 3-13
standard features, 1-3
static
generating, 4-1
shielding protection levels,
4-2
summary of test error codes,
E-1
support software, 2-23
surge-tolerant power supply,
1-4, 1-9, 2-17
switch settings, 7-5
system
BIOS, 1-8
board, 1-6
design, 1-5