o Torx Angle T-15 Screwdriver
o 3/16 Inch Open End Wrench
o Integrated Circuit (IC) Removal Tool
o Integrated Circuit (IC) Insertion Tool
o Modem Terminating Plug
o DIAGNOSTICS Program
o Parallel Interface Loopback Plug
o Serial Interface Loopback Plug
Chapter 1.3 Additional Reference Information
The following documentation and related software are available to support
these and other COMPAQ computer products:
o COMPAQ PORTABLE 386 PERSONAL COMPUTER OPERATIONS GUIDE (PN 107918-001)
o COMPAQ PORTABLE 386 PERSONAL COMPUTER TECHNICAL REFERENCE GUIDE
(PN 107920-001)
o COMPAQ PORTABLE 386 PERSONAL COMPUTER MEMORY EXPANSION INSTALLATION GUIDE
(PN 107530-002)
o Installation Guides for COMPAQ Portable Computers with Plasma Displays
Mass Storage Devices (PN 107320-003)
Expansion Unit (PN 107323-003)
COMPAQ Internal Modems (PN 107325-002)
40 Megabyte Tape Drive Expansion Unit (PN 107532-002)
Second Serial Board for International Only (PN 107533-001)
o Other Installation Guides
20 MHz 80387 Coprocessor (PN 113165-002)
COMPAQ Color Monitor (PN 106223-001)
300/600 MEGABYTE FIXED DISK DRIVE EXPANSION UNIT INSTALLATION AND
OPERATIONS GUIDE (PN 115835-002)
o COMPAQ ENHANCED COLOR GRAPHICS BOARD INSTALLATION AND OPERATIONS GUIDE
(PN 106540-001)
o COMPAQ ENHANCED COLOR GRAPHICS BOARD/COMPAQ COLOR MONITOR TECHNICAL
REFERENCE GUIDE (PN 106733-001)
o Information Cards
Desktop Pedestal for COMPAQ Personal Computers with Dual Mode Plasma
Displays (PN 107326-002)
Carrying Case for COMPAQ Personal Computers with Dual Mode Plasma
Displays (PN 107327-002)