Chapter 8. Removal and Replacement Procedures
Chapter 8.1 Introduction
Before starting the removal procedures, review Chapter 7, "Illustrated Parts
Catalog," to become familiar with the various part numbers and locations.
After completing all removal and replacement procedures, run the DIAGNOSTICS
Program on the COMPAQ PORTABLE 386 Personal Computer to verify the proper
operation of the replaced component.
Chapter 8.2 Preparation Procedure
Before beginning the procedures in this chapter, complete the following steps:
1. Turn off the computer.
2. Disconnect any peripheral devices (printer, monitors, and so on) from the
computer.
3. Disconnect the AC power cord from the AC outlet and from the computer
(Figure 8-1).
Chapter 8.3 Keyboard Assembly
To remove the keyboard assembly:
To Next Page
Loading...
