EasyManuals Logo

Compaq PORTABLE 386 User Manual

Compaq PORTABLE 386
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
1210 - 09 Modem exceeded maximum
redial limit.
1210 - 10 Line quality prevented
remote connection.
1210 - 11 Modem timed out waiting
for remote connection.
==============================================================================
Table 6-11. Fixed Disk Drive Error Codes (17xx - xx Range)
==============================================================================
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1700 - xx Fixed Disk Drive ID Test The following steps apply to error
codes 1700 - xx through 1717 - 73:
1700 - 05 Failed to reset controller
1. Check the system board jumper
1700 - 09 Failed to format a track settings and retest (see
Chapter 9, "Jumper and Switch
1700 - 41 Failed to ID fixed disk drive Settings").
(drive not ready). 2. Replace the fixed disk drive
signal and power cables and
1700 - 42 Recalibrate fixed disk drive retest.
failed. 3. Replace the fixed disk drive
and retest.
1700 - 45 Failed to get fixed disk 4. Replace the system board and
drive parameters from ROM. retest.
1700 - 46 Invalid fixed disk drive
parameters found in ROM.
1700 - 66 Failed to initialize fixed
disk drive parameter.
1700 - 69 Failed to read drive size
from controller.
1700 - 70 Failed translate mode.
1700 - 71 Failed nontranslated mode.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1701 - xx Fixed Disk Format Test The following steps apply to error
codes 1700 - xx through 1717 - 73:
1701 - 05 Failed to reset controller
1. Check the system board jumper
1701 - 09 Failed to format a cylinder settings and retest (see
Chapter 9, "Jumper and Switch
1701 - 42 Recalibrate fixed disk drive Settings").
failed. 2. Replace the fixed disk drive
signal and power cables and
1701 - 58 Failed to write sector retest.
buffer. 3. Replace the fixed disk drive

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq PORTABLE 386 and is the answer not in the manual?

Compaq PORTABLE 386 Specifications

General IconGeneral
BrandCompaq
ModelPORTABLE 386
CategoryDesktop
LanguageEnglish

Related product manuals