printer, remove the loopback plug from the parallel interface and connect the
printer instead.
6. Reconnect the AC power cord to a well grounded AC outlet.
7. Insert the latest version of the COMPAQ DIAGNOSTICS diskette into Drive A
(Drive Position 1), and push in on the drive button.
8. Turn on the computer.
See the SUPPORT SOFTWARE MAINTENANCE AND SERVICE GUIDE for detailed
information on problem isolation.
Chapter 3.3 Problem Isolation Flowchart
The problem isolation flowchart provides a quick reference for identifying and
correcting problems that may occur during POST. The flowchart gives
troubleshooting procedures for identifying malfunctions. It also directs you
to the SUPPORT SOFTWARE MAINTENANCE AND SERVICE GUIDE and to Chapter 6, "Error
Messages and Codes," for more detailed troubleshooting information.
To Next Page
Loading...
Need help?
General