Compaq PORTABLE 386 User Manual

303 - 01 Keyboard LED test,
8042 self test failed.
303 - 02 Keyboard LED test,
retest test failed.
303 - 03 Keyboard LED test,
retest failed.
303 - 04 Keyboard LED test,
LED command test failed.
303 - 05 Keyboard LED test,
LED command test failed.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
303 - 06 Keyboard LED test, The following steps apply to error
LED command test failed. codes 301 - 01 through 304 - 06.
303 - 07 Keyboard LED test, 1. Check the keyboard connector.
LED command test failed. If disconnected, turn off the
computer and connect the
303 - 08 Keyboard LED test, command keyboard.
byte restore test failed. 2. Replace the keyboard and retest.
3. Replace the system board and
303 - 09 Keyboard LED test, retest.
LEDs failed to light.
304 - 01 Keyboard repeat key test
failed.
304 - 02 Unable to enter mode 3.
304 - 03 Incorrect scan code from
keyboard.
304 - 04 No make code observed.
304 - 05 Cannot disable repeat key
feature.
304 - 06 Unable to return to normal mode.
==============================================================================
Table 6-5. Parallel Printer Error Codes (4xx - xx Range)
==============================================================================
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
401 - 01 Printer connected test The following steps apply to error
failed. codes 401 - 01 through 498 - 00:
402 - 01 Printer data register 1. If a printer is connected, be
failed sure it is turned ON and in the
online mode.
402 - 02 Printer control register 2. Check the jumper settings on the
failed. system board (see Chapter 9,
"Jumper and Switch Settings").

Compaq PORTABLE 386 Specifications

General

Brand	Compaq
Model	PORTABLE 386
Category	Desktop
Language	English