Compaq PORTABLE 386 - Chapter 8.22 Plasma Display

To replace the LED assembly and the LED/speaker and keyboard cables, reverse
steps 1 through 17.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
CAUTION
When replacing the speaker, do not touch the silver speaker surface.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Chapter 8.22 Plasma Display
To remove the Plasma Display:
1. Complete the preparation procedure (see Section 8.2).
2. Unlatch the display enclosure by pressing down on the two latches on top
of the display enclosure. Pull the display enclosure away from the main
enclosure (Figure 8-69).