Compaq PORTABLE 386 User Manual

and retest.
1701 - 59 Failed to read sector 4. Replace the system board and
buffer. retest.
1701 - 66 Failed to initialize fixed
disk drive parameter.
1702 - xx Fixed Disk Drive Read Test
1702 - 01 Exceeded maximum soft error
limit.
1702 - 02 Exceeded maximum hard error
limit.
1702 - 03 Previously exceeded maximum
soft error limit.
1702 - 04 Previously exceeded maximum
hard error limit.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1702 - 05 Failed to reset controller The following steps apply to error
codes 1700 - xx through 1717 - 73:
1702 - 06 Fatal error while reading
1. Check the system board jumper
1702 - 40 Failed cylinder 0. settings and retest
(see Chapter 9, "Jumper and
1702 - 65 Exceeded maximum bad sector Switch Settings").
per track. 2. Replace the fixed disk drive
signal and power cables and
1702 - 68 Failed to read long. retest.
3. Replace the fixed disk drive
1702 - 70 Failed to translate mode. and retest.
4. Replace the system board and
1702 - 71 Failed nontranslated mode. retest.
1702 - 72 Exceeded maximum bad track
limit.
1702 - 73 Previously exceeded maximum
bad track limit.
1703 - xx Fixed Disk Drive Write/Read/
Compare Test
1703 - 01 Exceeded maximum soft error
limit.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1703 - 02 Exceeded maximum hard error The following steps apply to error
limit. codes 1700 - xx through 1717 - 73:
1703 - 03 Previously exceeded maximum 1. Check the system board jumper

Compaq PORTABLE 386 Specifications

General

Brand	Compaq
Model	PORTABLE 386
Category	Desktop
Language	English