Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1900 - xx Tape Test The following codes apply to
error codes 1900 - xx through
1900 - 01 Tape not installed. 1991 - xx:
1900 - 02 Drive installed in other 1. Replace the tape cartridge
drive 3. and retest.
2. Replace the tape drive
1900 - 26 Cannot identify drive. expansion unit and retest.
3. Replace the system board
1900 - 27 Drive not compatible with and retest.
controller.
1900 - 92 Tape drive mismatched.
1900 - 93 Tape cartridge mismatched.
1901 - xx Tape Servo Write Test
1901 - 01 Drive not installed.
1901 - 02 Cartridge not installed.
1901 - 03 Tape motion error.
1901 - 04 Drive busy error.
1901 - 05 Track seek error.
1901 - 06 Tape write protected error.
------------------------------------------------------------------------------
Error
Code Error Description Recommended Action
------------------------------------------------------------------------------
1901 - 07 Tape already servo written. The following codes apply to
error codes 1900 - xx through
1901 - 08 Unable to servo write. 1991 - xx:
1901 - 11 Drive recalibration error. 1. Replace the tape cartridge
and retest.
1901 - 21 Got servo pulses second time 2. Replace the tape drive
but not first. expansion unit and retest.
3. Replace the system board
1901 - 22 Never got to end of tape and retest.
after servo check.
1901 - 25 Unable to erase cartridge.
1901 - 27 Drive not compatible with
controller.
1902 - xx Tape Format Test
To Next Page
Loading...
