2022_05 SAM_EN | 01 3
1 About this manual
tt
These instructions will enable you to handle your product safely and efficiently.
Safety
Before attempting to install or operate the product you have purchased, read the operating instructions carefully
to familiarise yourself with the product.
These instructions are intended for qualified personnel only. These are persons who, due to their technical
training and knowledge of the relevant standards, are able to assess the work assigned and recognise possible
hazards.
The basic prerequisite for safe working is compliance with all the safety instructions and handling instructions
given in these instructions. In addition, the local accident prevention regulations and the general safety
regulations for the application area of the product apply.
The illustrations in these instructions are for basic understanding and may differ from the actual design.
In addition to these instructions, the local legal regulations for connection to the local low-voltage network of a
grid operator or the technical regulations of the trade associations apply.
Validity
These instructions reflect the state-of-the-art of the product at the time of publication. The contents of these
instructions are not the subject of a contract, but are for information purposes. Compleo Charging Solutions AG
reserves the right to make changes to the content and technical specifications of these instructions without
having to disclose them. Compleo Charging Solutions AG cannot be held responsible for any inaccuracies or
unsuitable information in these instructions that have arisen due to changes in content and technology after
delivery of the product, as there is no obligation to update these instructions on an ongoing basis.
Warranty
Our deliveries and services are based on the general terms of delivery for products of the electrical industry as
well as our general terms of sale. The information in these instructions, in particular the technical data, operation,
dimensions and weights, are subject to change at any time.
Handling
These instructions are organised so that all work necessary for operation and use can be carried out by suitably
qualified personnel.
In order to clarify and facilitate the necessary work, images are assigned to certain processing steps. If hazards
to persons and material cannot be excluded for certain work, these activities are identified by certain pictograms.
Their meaning can be found in the Safety Instructions chapter.
Storing the instructions
Also keep these instructions in a suitable place for future reference.
Hand out these instructions with the unit when changing operators.
To Next Page