Compleo Cito 500 BM SAM - Maintenance Plan

Maintenance
2023-05 D111XXXXXX | 05 89
8.1 Maintenance plan
Interval
Component/location
Maintenance work
Every 6
months
Residual current circuit
breaker
Check with test button.
Surge arrester
Visual inspection or check with test button.
Yearly
Location
Visual inspection, e.g. for distances to objects (bushes,
electrical installations ,etc.), attachment.
Electrical components
Visual inspection, e.g. cables, lines, screw connections,
plugs, RCD, MCB, display, LED, display, surge protection.
Metrological verification according to test report, see
Annex.
Check for function, e.g. RCD (test button), MCB, IMD.
Mechanical components
Visual inspection, e.g. housing, paint, foils, covers.
Check for function, e.g. door and closing mechanism;
check parking position.
Charging system
Check for function, e.g. start and stop of a charging
process at all charger interfaces.
Wear parts
Replace, e.g. filter mats (only for active cooling).
As required
Charging system
Clean the inside and outside of the housing.
NOTE
A test report is included in the Annex of this manual and/or can be obtained from us on request.