Operation
2023-05 D111XXXXXX | 05 71
The status LED no longer lights up.
Type 2 plug with attached plug
1. Pull out the charging cable from the socket of the
vehicle.
The status LED no longer lights up.
7.1.9 Retrieve billing data
Giro-e
Within a period of 10 minutes after completion of a charging process, it is
possible to display the SEPA ID by holding the Giro card in front of the RFID
field again.
App on smartphone/tablet or web interface
All charging process data can be called up permanently via an individual link
in the reason for payment note of the bank account statement.
The essential information of the charging process is visible in the account
statement.
If the power supply is interrupted, the station is set to a safe state. This means that the charging
processes are stopped and a new authorisation is required to start the charging process.
To Next Page