Product description
16 D111XXXXXX | 05 2023-05
3.4 General Functions and Scope of Application
The compleo® Cito BM 500 charging system has the functionality for mode 3 and mode 4 charging. It is
produced in different versions. The one-piece housing can be mounted on solid ground using two mounting
methods. The charging system has up to three charging points at which two parallel charging processes can be
carried out. The number of charger interfaces can be configured according to customer requirements and are
available as attached charging cables with a CCS, CHAdeMO or type 2 charging point with sliding cover.
For "BM" type installation, the charging system is fixed directly on the ground or, by means of a concrete base,
in the ground surrounding the charging system. The charging system is produced in different performance
classes and is therefore able to carry out reliable and fast charging processes on vehicles in almost any existing
network situation. Depending on the product class and scope, the charging systems are suitable for use in
public and semi-public areas. The charging systems can be used indoors and outdoors.
The charging system has different displays which are embedded in the housing. Display options include an
LCD multicolour display and status LEDs. Different states and messages, such as an ongoing charging
process, can be easily output and read using the display in combination with the status LEDs.
The compleo® Cito BM 500 charging system incorporates state-of-the-art protection technology that ensures
maximum safety for the charging system and persons operating it.
To Next Page