Installation
48 D111XXXXXX | 05 2023-05
5.5 Electrical installation
Danger due to electric current
Touching live parts will result in electric shock with serious injury or death.
• Work on electrical components may only be carried out by a qualified electrician and in
accordance with electrical engineering rules.
• Ensure they are de-energised and take suitable protective measures.
• For safe disconnection during installation work, disconnect the charging system from the power
supply.
– Switch off the circuit breaker or main switch.
Observe the national legal requirements and regulations during electrical installation. In Germany,
these include the following safety requirements:
• DIN VDE 0100-100
• DGUV Regulation 1
• DGUV Regulation 3+4
• TRBS 1201
Danger due to electric current
Touching live parts will result in electric shock with serious injury or death.
• Only carry out work on electrical components after a period of more than 5 minutes.
To Next Page