In addition to the charging station, the scope of
delivery of the charging system includes the
components listed on the following page.
The illustration shows a fully equipped compleo®
Cito BM 500 charging system. Due to special
requirements and/or customer wishes, a
purchased charging system of the same type may
differ from this illustration.
The following table lists the technical
characteristics of a charging system according to
the standard portfolio.
In case of changes compared to the standard
product, the changed technical characteristics
are attached in a separate table in the Annex.
Any of the listed options can be included, but
need not be present. For example, only the CSS
or CHAdeMO charger interface may have been
ordered. If several charger interfaces are
available, however, only simultaneous charging at
one DC and one AC interface is possible.
To Next Page