Product description
2023-05 D111XXXXXX | 05 13
3.2 Series label
The charging systems from Compleo Charging Solutions AG can be identified by an individual serial
number. A series label is attached outside the charging system. The following illustration shows an
example of a series label:
Fig. 2: Series label
The following information can be identified by means of the serial label:
1 Address/service number/website of the manufacturer
2 Serial number of the charging system
3 Ambient temperature
4 Calendar week and year of manufacture
5 Place of manufacturer
6 Protection type and protection class of the charging system
7 Production standard
8 Pictogram (safety instructions)
9 Pictogram (protection class, disposal, operating and maintenance instructions)
10 Metrology marking
11 Accuracy class of the measuring instrument according to EN 50470
12 Number of the type examination certificate
13 Output DC: Voltage range, max. current
14 Output AC: Voltage, max. current
15 Input: Number of phases x voltage frequency input current
16 Material number or article number of the charging system
17 Type/installation type/charging interfaces/charging power of the charging system
18 Name of the manufacturer
To Next Page