Compleo Cito 500 BM SAM - End of the Charging Process

22 SAM_EN | 01 2022_05
3.5 End of the charging process
After the charging process is completed (after disconnection from the vehicle
1
on the charging station side), the
information is shown on the display for checking purposes. The display can be extended by a further 20 seconds
by pressing the right key and it closes automatically after this period has elapsed.
Figure 14: End of the charging process (example)
NOTE
In order for the end user to be able to exercise the option of a billing check, there should be a visible indication
for the customer that the he should take a photo of the summary for this purpose (after the charging process!).
If the displayed time deviates by >75 min. from the real time, it is recommended not to use the charging
station.
A measured value with a time duration < 60s must not be used for billing purposes!
1
If the vehicle has its own charging cable, it is not sufficient to simply unplug the vehicle. The time
measurement only stops when the plug is pulled out of the charging station.