Interactive screen displays with the user to invoke charging procedures.
After entering the start value, press "Next" to enter
the final value.
(Called up after touching one of the two buttons).
After entering the final value, press "Check".
Screen output for a found entry.
If there are several data sets (possible with a charge
of ≤ 0Wh), scrolling is possible.
Possible information screens
"Invalid" notice in the charging process summary if
there was a communication problem.
The data set is not billable according to time!
Notice if there was a communication problem during
the charging process.
The data set is not billable according to time!
To Next Page