Comtech EF Data DT-4500 Series - Config | Utility

DT-4500 Series C- and Ku-Band Down Converters MN/DT4500.IOM
Ethernet Interface Operation Revision 2
7–21
7.5.3.4 Config | Utility
Use this page to configure a variety of converter operating parameters.
Figure 7-14. ‘Config | Utility’ Page
Date
Enter a date in the form MM/DD/YY (where MM = month [01 to 12], DD = day
[01 to 31], and YY = year [00 to 99]).
Time
Enter a time in the form HH:MM:SS (where HH = hour [00 to 23], MM = minutes
[00 to 59], and SS = seconds [00 to 59]).
Click [Change Date/Time].
Circuit ID
Enter a Circuit ID string of up to 48 characters – 24 characters per line. Click
[Change CID].