Comtech EF Data DT-4500 Series - Front Panel Operation - Menu Matrix

DT-4500 Series C- and Ku-Band Down Converters MN/DT4500.IOM
Front Panel Operation Revision 2
6–6
6.2 Front Panel Operation – Menu Matrix
Chapter Sect. Menu Screen Description Submenu Selections
6.2.1 Opening Screen –
6.2.2
Select (Main) Menu
CONFIG; MONITOR; FAULTS; PRE-SELECTS; UTILITY
6.2.3 CONFIG (Configuration) OUTPUT; REMOTE; REDUNDANCY; FAULTRECOVERY
6.2.3.1 (CONFIG:) OUTPUT Frq(MHz); Atten (dB); Rx
6.2.3.2 (CONFIG:) REMOTE Local; Serial; Ethernet
6.2.3.2.1
(REMOTE:) LOCAL
–
6.2.3.2.2 (REMOTE:) SERIAL Serial Mode; Address; Baudrate
6.2.3.2.3 (REMOTE:) ETHERNET ADDRESS; GATEWAY; SNMP
6.2.3.2.3.1
(REMOTE:) ETHERNET
¹
ADDRESS
–
6.2.3.2.3.2
(REMOTE:) ETHERNET
¹
GATEWAY
–
6.2.3.2.3.3
(REMOTE:) ETHERNET
¹
SNMP
COMMUNITIES; TRAPS
6.2.3.3
(CONFIG:) REDUNDANCY
MODE; Auto/Manual; FORCE; HSB
6.2.3.3.1
(REDUNDANCY:) MODE
On/Off; BU/#01-12
6.2.3.3.2 (REDUNDANCY:) Auto/Manual Select: A/M
6.2.3.3.3 (REDUNDANCY:) FORCE Offset (dB); Activate BU (Yes/No)
6.2.3.3.4
(REDUNDANCY:) HSB
–
6.2.3.4
(CONFIG:) FAULTRECOVERY
Manual/Auto
6.2.3.5 (CONFIG:) COLDSTART –
6.2.4 MONITOR –
6.2.5
FAULTS
CURRENT; STORED; VIEW
6.2.5.1
(FAULTS:) CURRENT
–
6.2.5.2 (FAULTS:) STORED VIEW; CLEAR-ALL
6.2.5.2.1
(FAULTS:) STORED ¹ VIEW
–
6.2.5.2.2
(FAULTS:) STORED ¹ CLEAR-ALL
–
6.2.5.3 (FAULTS:) MASK Fault/Masked
6.2.6
PRE-SELECTS
LOAD; PROGRAM; CLEAR
6.2.6.1 (PRE-SELECTS:) LOAD No/Yes
6.2.6.2 (PRE-SELECTS:) PROGRAM Pre-Select Slot #; Frq (MHz); Atten (dB)
6.2.6.3 (PRE-SELECTS:) CLEAR No/Yes
6.2.7 UTILITY
TIME; DISP; FIRMWARE; AID; REFOSC; SLOPE; LAMP-
TEST
6.2.7.1 (UTILITY:) TIME Time (HH:MM:SS); Date (MM/DD/YY)
6.2.7.2 (UTILITY:) DISP 25%/50%/75%/100%
6.2.7.3
(UTILITY:) FIRMWARE
INFO; SELECT
6.2.7.3.1
(FIRMWARE:) INFO
BOOTROM; IMAGE#1; IMAGE#2
6.2.7.3.1.1
(FIRMWARE:) INFO ¹ BOOTROM
–
6.2.7.3.1.2
(FIRMWARE:) INFO ¹ IMAGE#1/#2
BULK; APP; FPGA
6.2.7.3.2 (FIRMWARE:) SELECT (IMAGE) #1/#2
6.2.7.4 (UTILITY:) AID (Application ID Message)
6.2.7.5
(UTILITY:) REFOSC
(Reference Frequency Adjustment)
6.2.7.6
(UTILITY:) SLOPE
(Converter Slope Adjustment)
6.2.7.7 (UTILITY:) LAMP-TEST No/Yes