Configuration and Setup 3-8
select.
On “Print Sheet” select Enter. The system will print a color patch sheet.
Feed the sheet into the scanner
On “Scan Sheet” select Enter. The system will scan the color patch sheet and calculate color
matching values for future jobs with the current media type.
See the section on “how do I… Create a New Media Type” for more details.
12
Test your system
Make a simple copy to test your system.
See the section on “how do I… Make a Copy” for details.
13
Verify Scan to File functionality
Scan to a network PC to test Scan to file functionality. The PC must have WIDEsystemNET
installed and must be setup for network scanning.
See instructions on setting up a PC for scan2net in WIDEsystemNET on-line help. See
more on scanning to a PC in the section “How do I… Scan to local or network PC from the iJET
panel”
14
Verify Shared Scanner functionality
The netwok PC must have WIDEsystemNET and compatible scan/copy software installed. Check
that you can identify the scanner from the PC and perform a test scan.
See instructions about setting up a PC for scan2net in the WIDEsystemNET on-line help.
See information on using a shared scanner in the scan or copy application’s on-line help.
To Next Page
Loading...
