Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 123
2. Feed the CBL-CAT5E-ZUMLINK-P cable through the mounting hole, and connect it to the
Zūm Link Presence Detectors backplate.
For presence detectors with additional output relays, connect the relays to a relay-input
capable device before mounting the backplate to the mounting hole.
Relay connection applicable for the following presence detectors:
l
ZUMLINK-IR-QUATTRO-DLS-RLY
l
ZUMLINK-DT-QUATTRO-DLS-RLY
l
ZUMLINK-US-QUATTRO-DLS-RLY
l
ZUMLINK-IR-QUATTRO-HD-DLS-RLY
l
ZUMLINK-US-HALLWAY-DLS-RLY
l
ZUMLINK-US-ONEWAY-DLS-RLY
3. Flip the backplate spring tabs to the vertical position and insert them into the mounting
hole.
To Next Page
Loading...
