74 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
Hub Specifications
The ZUM-HUB4 is featured in three kits.
l
ZUML-HUB4-GW Specifications on page 77
l
ZUML-HUB4-PAK Specifications on page 78
l
ZUML-HUB4-CN-PAK Specifications on page 80
ZUM-HUB4 Specifications
Device Support and Time Clock
Rooms 1,000 maximum;
Zūm wired, Zūm wireless, and external
External Rooms and
Mirrored Rooms
Varies by control system based on hardware capabilities and program
complexity of the external processor
1
Communications
Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half
duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH,
SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE
802.1X, SNMP, IPv4 or IPv6, Active Directory® authentication, IIS v.6.0 web
server
Control Subnet 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP server, DNS Server, port forwarding, isolation mode
USB Supports computer console via front panel USB 2.0 device port
Connectors and Card Slots
MEMORY (1) SD memory card slot;
Accepts one 32 GB SD or SDHC card to enable logging and for troubleshooting
purposes
USB (1) USB Type A connector, female;
USB 2.0 host port;
For firmware upgrades
LAN (1) 8-pin RJ-45 connector, female;
10Base-T/100Base-TX/1000Base-T Ethernet port;
Connects to the customer’s LAN
CONTROL SUBNET (1) 8-pin RJ-45 connector, female;
10Base-T/100Base-TX/1000Base-T Ethernet port;
Provides a dedicated local network for Zūm Net wireless gateways and wired
rooms
To Next Page
Loading...
