Crestron Zum - Presence Detectors Installation

Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 117
Presence Detectors Installation
The presence detectors can be mounted to a junction box (not included) or directly to a ceiling.
Before mounting, make sure the backplate is separated from the presence detectors. Refer to
Remove or Attach the Backplate on page 119.
Presence Detector with Daylight Sensing
l
ZUMLINK-IR-QUATTRO-DLS with passive infrared technology
l
ZUMLINK-DT-QUATTRO-DLS with passive infrared and ultrasonic technology
l
ZUMLINK-US-QUATTRO-DLS with ultrasonic technology
l
ZUMLINK-IR-QUATTRO-HD-DLS with high-definition, passive infrared technology
l
ZUMLINK-US-HALLWAY-DLS with ultrasonic technology and bidirectional detection for
hallways
l
ZUMLINK-US-ONEWAY-DLS with ultrasonic technology and unidirectional detection for
hallways
Presence Detector with Daylight Sensing and Output Relay
l
ZUMLINK-IR-QUATTRO-DLS-RLY with passive infrared technology
l
ZUMLINK-DT-QUATTRO-DLS-RLY with passive infrared and ultrasonic technology
l
ZUMLINK-US-QUATTRO-DLS-RLY with ultrasonic technology
l
ZUMLINK-IR-QUATTRO-HD-DLS-RLY with high-definition, passive infrared technology
l
ZUMLINK-US-HALLWAY-DLS-RLY with ultrasonic technology and bidirectional detection
for hallways
l
ZUMLINK-US-ONEWAY-DLS-RLY with ultrasonic technology and unidirectional detection
for hallways