Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 131
ZUMLINK-CONV-CN Connections
The ZUMLINK-CONV-CN integrates Cresnet devices into a Zūm system. Use the Zūm link cable
(CBL-CAT5E-ZUMLINK-P) to connect the RJ-45 port to Zūm link sensors and keypad. Connect
the Cresnet terminal block to legacy Cresnet lighting products, including a SpaceBuilder® system
(such as the CL-SPACEBUILDER-DIN) or traditional processor panel.
To Next Page
Loading...
