Crestron Zum - Keypad Features

Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 27
Keypad Features
Product features for the ZUMLINK-KP are provided below.
(Faceplate not included)
l
Provides control of one or more Zūm® wired J-Box Load Controllers
l
RS485 communications for increased reliability
l
Preprogrammed rocker button
l
Configurable with two, four, six, or eight engraved or pad printed button trees
(ZUMLINK-BTN2, ZUMLINK-BTN4, ZUMLINK-BTN6, ZUMLINK-BTN8, not included)
l
Powered by 24V Zūm Link bus
l
Two RJ-45 connections for device daisy-chaining
l
Standard 3.5in. (89mm) deep electrical box installation
l
Button tree and bezel available in almond, black, gray, red, and white finish
l
Matching decorator-style faceplate required (FP-G Series, not included)
Zūm Link Wired Technology
Zūm Link technology enables in-room lighting control through keypads and sensors wired to
controllers. Zūm Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold
separately, refer to Cables on page 14) to RJ-45 ports provide simple daisy-chaining and lighting
control of compatible loads. The Zūm Wired devices work together in a local ecosystem to
provide customized solutions using the Zūm app.
Button Configurations
The keypad is equipped with a single, white rocker button for switching or dimming control and is
configurable with four, six, or eight pad printed or engravable button trees (sold separately).