15 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
l
CBL-CAT5E-ZUMLINK-P-50
l
CBL-CAT5E-ZUMLINK-P-12-10PK
l
CBL-CAT5E-ZUMLINK-P-25-10PK
Adapter Cable
The Zūm® Wired ZUMLINK-CONV-CN adapter cable allows Zūm wired devices with Zūm Link
communication to integrate via Cresnet® for legacy controls. The plenum-rated adapter converts
a single female RJ-45 Zūm Link port connection to use on the Cresnet network. Cresnet screw
terminals provide a contact closure input with the ability to trigger Zūm devices into Emergency
Override mode. For flexible in-room wiring, daisy chain Zūm Link with the ZUMLINK-SPLTR-RJ45
RJ-45 splitter to avoid dead ends.
RJ-45 Splitter
The Zūm® Wired ZUMLINK-SPLTR-RJ45 RJ-45 splitter enables one CBL-CAT5E-ZUMLINK-P
cable to output two Zūm Link ports. It is plenum rated and works with Zūm Link devices. For
flexible, in-room wiring, use with the ZUMLINK-CONV-CN to daisy chain Zūm Link devices with
Cresnet® devices.
To Next Page
Loading...
