130 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
Cable Accessory Installation
Refer to the following sections for using the ZUMLINK-SPLTR-RJ45 and ZUMLINK-CONV-CN in
a Zūm Wired system.
In the Box
Qty. Description
1 ZUMLINK-CONV-CN, Zūm® Wired Adapter Cable for Cresnet® Devices or
ZUMLINK-SPLTR-RJ45, Zūm® Wired RJ-45 Splitter
ZUMLINK-SPLTR-RJ45 Connections
The ZUMLINK-SPLTR-RJ45 is a pass-through accessory that splits one Zūm link signal into two
ports. Use Zūm link cable (CBL-CAT5E-ZUMLINK-P) to connect bidirectional RJ-45 ports to Zūm
link devices, including Zūm link load controllers, sensors, or keypads.