Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 8
Overview
Zūm Wired is a distributed lighting control system that uses industry standards, such as 0-10V,
DALI®, DMX and phase control all merged on an enterprise IoT network, Zūm Net. This network
not only provides communication and control of your lighting, but also seamlessly integrates
with Crestron® Unified Communications systems and third- party occupancy, environmental &
acoustical sensors or other data related IoT devices.
All Zūm devices interface with the Zūm app, providing easy set up for all room aspects and
parameters including presets, lighting levels and optimized sensor settings. Spaces or rooms can
be saved and used as templates for use in other spaces, which greatly reduces the time required
to start up your systems.
Load Controllers
Zūm Net and Zūm Link load controllers provide a sophisticated, wired lighting control solution
for Zūm® commercial lighting systems.
ZUMNET-JBOX-16A-LV and ZUMNET-JBOX-DALI
Zūm Net devices facilitate communications between rooms via CBL-CAT5E-ZUMNET-P cables
(sold separately, refer to Cables on page 14) and can be daisy-chained for network expansion.
They also connect to connect to Zūm Link devices for in-room communication. The load
controllers mount directly to a 4in. square junction box.