Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 251
Manage Devices
In the System View, manage devices in the Hardware Management tab. Devices are divided into
two categories: Wired and Wireless. Expand the Wireless menu to view and edit wireless devices.
Expand the Wired menu to view and edit wired devices.
Rooms must be discovered by the ZUM-HUB4 before performing any procedure in this section.
Refer to Discover Rooms on page 224.
Wireless Devices
Access wireless gateways in the Hardware Management tab and expand the Wireless menu.
View information about the gateway, assign Floor or Zone IDs, and identify or remove a
gateway. To view, move, and delete the rooms assigned to the gateway, refer to Review Rooms
Assigned to a Gateway on page 252.
Information about the gateway:
l
Gateway Hostname: Displays the gateway's name.
l
IP ID: Displays the gateway's IPID.
l
Serial Number: Displays the gateway's serial number.
l
IP Address: Displays the gateway's IPaddress.
l
Floor ID: Refer to Assign a Floor ID to a Gateway on page 252.
l
Zone ID: Refer to Assign a Floor ID to a Gateway on page 252.
l
Action: Refer to Identify a Gateway on page 252 and Remove a Gateway on page 252.
To Next Page
Loading...
Need help?
General
